Cleaning & Maintenance

Notice step by footstep instructions and how-to videos for support in yourdaily andmonthly clean of your Formula Pro Avant-garde. Also, observe the all-time way to store your Formula Pro Avant-garde once completely finished with it.

Daily Make clean

Information technology is EXTREMELY Important to clean the funnel subsequently every 4 bottles made.This volition go along your Formula Pro Advanced dispensing accurately.

Always thoroughly wash your hands and any surfaces that will be used before the daily clean.

1. Remove the Funnel and Funnel cover by pulling out and downwards.PLEASE Note: Yous don't need to remove the Pulverization Container parts for daily cleaning.

2. Launder Funnel and Funnel Cover with hot soapy water and rinse well. Air dry completely before re-assembling.

3. Wipe down Powder-Dispensing Hole on the underside of the Powder container and remove any spilt powder or milk on the automobile using a dry newspaper towel or soft dry out clean textile.

iv. Replace the water in the water container daily to keep information technology fresh.Tip: To avoid waste and assistance yous remember, just fill up the water container with what you think yous will need each twenty-four hours.

To make daily cleaning easier you tin can purchase an extra Funnel and Funnel Comprehend to give you one in utilise and one in the wash.Store Now.

Monthly Descaling Instructions

Once a calendar month requite your Formula Pro Advanced a thorough cleaning.

Hand wash all parts shown higher up with warm soapy water, rinse well and air dry thoroughly.

Yous tin leave the formula pulverisation in the Powder Container during the descaling process.

To foreclose mineral scale on the water heater inside your Formula Pro Avant-garde, follow these easy steps:

ane. Remove the H2o Tank, empty it and fill up information technology with 600ml distilled (clear) vinegar and 600ml of sterile or pre-boiled cooled h2o.

2. Place the Water Tank on the Base of the machine and place a cup larger than 300ml nether the funnel.

3. Select "300ml" with the "ml" push button, then press the "water only"  to dispense.

4. Empty the cup, place information technology back under the Funnel, then press the "water just" button once again to manipulate another 300ml.

5. Now unplug the motorcar, remove the H2o Tank, and empty it. Allow the machine sit for four hours.

6. Wash, rinse and fill the Water Tank to the max line with sterile or pre-boiled cooled h2o, then identify information technology dorsum on the base of operations.

7. Plug in the machine, place a loving cup to catch 300ml water and use the "water but" push button to run a 300ml cycle. Dispose of the h2o dispensed in the loving cup and then repeat this step to run the entire tank of water through the machine. When the "Low Water" indicator turns on, you lot're done rinsing.

viii. Refill the H2o Tank with sterile or pre-boiled cooled water and return to normal use.

Long Term Storage Instructions

Information technology is EXTREMELY Of import to clean the machine and remove all formula powder residuum before storage. If yous're going to store your Formula Pro for  after apply, or will not use information technology for a while, detect the instructions beneath.

one. Remove the powder container parts, funnel, funnel cover, drip tray and water tank from the base.

2. Wipe the base of operations with a clean clammy material and brand certain to remove all formula residue. Dry the base well.

3. Empty the pulverisation container, wash all pulverisation container parts, air dry thoroughly, reassemble and reinstall on the base.

iv. Follow the monthly descaling instructions to a higher place ane-7 only.

5. Now place a cup to catch 300ml water under the funnel, then press and hold the "water only" push button for 5 seconds. Water will dispense continuously until the machine is completely empty, then stop automatically.

6. Unplug the machine, remove the funnel, funnel embrace and water tank, air dry out them both thoroughly and reinstall.

7. Your machine is now ready for storage. Pack the machine in its box, or enclose it in a bag to keep it dust-free.

Need Further Aid?

Our Customer Service Team is set up to answer your questions.